ITT Conoflow – Low Pressure Regulators

GDH Series Purge Assemblies:

Conoflow’s GDH series purge assemblies consist of a GH21XT series fixed differential pressure regulator piped to a needle valve equipped flow meter. The fixed differential pressure regulator maintains a constant pressure drop across the flow meter, resulting in consistent flow regardless of downstream pressure fluctuations.

FR95 Airpak Filter-Regulator:

Conoflow’s FR95 Series Airpak, Filter-Regulator is used to provide clean, accurate air to instruments, valves, positioners, transducers and other pneumatic control devices. This units design provides high flow capability, durable materials of construction and bubble tight shut-off.

GFX02/GFX04 Filters:

Conoflow’s GFX Series Filters are used to provide clean air to instruments and other pneumatic devices. The 35 micron filter removes foreign particles from the air allowing intermediate and final control devices to operate at peak efficiency. Available in brass or aluminum construction, the GFX Series Filters cover most of today’s instrument and industrial applications.

GH20VT – 316 Stainless Steel Low Pressure Regulator:

Conoflow’s GH20VT – 316 Stainless Steel Low Pressure Regulator is designed to accurately regulate the sub-atmospheric pressure of a vessel being evacuated. These units are especially suited for laboratory work and test stands for simulation of high altitude conditions.

GH04 Cushion Loading Regulator:

The model GH04 Cushion Loading Regulator is a compact unit designed for industrial and commercial services requiring a constant, regulated air pressure. Primarily used as a cushion loading device for Conoflow Piston Actuators, this unit’s design and high exhaust capabilities lend itself to many other application requirements. Constructed of all aluminum, this lightweight unit offers versatility in line mounting and gauge mounting with dual input and output 1/4″ NPT connections. It is available with a 0-60 PSI (0-414 kPa) regulated pressure range and Buna “N” elastomers. The controlling ball valve is Viton.

GFH45 Airpak Filter Regulators:

Conoflow’s GFH45 Airpak Filter-Low Pressure Regulators are widely used to provide clean, regulated air pressure to instruments and controls, automatic machinery and other pneumatic devices.

Conoflow GH10 – 303 SST (Internals) Regulator:

Conoflow’s GH10 (303 Stainless Steel Internals) Manual Loading Regulators are precision units designed for use in laboratory environments, remote loading of pneumatic devices, speed changers and other general purpose applications.

GH10 – 316 Stainless Steel Regulator:

Conoflow’s GH10 (316 Stainless Steel Internals, Body & Bonnet) Manual Loading Regulators are precision units designed for use in laboratory environments, remote loading of pneumatic devices, speed changers and other general purpose applications.

Conoflow GH10 (Aluminum) Manual Loading Regulator:

Conoflow’s GH10 (Aluminum Bonnet) Manual Loading Regulators are precision units designed for use in laboratory environments, remote loading of pneumatic devices, speed changers and other general purpose applications.

Conoflow GH10 (Brass) Manual Loading Regulator:

Conoflow’s GH10 (Brass) Manual Loading Regulators are precision units designed for use in laboratory environments, remote loading of pneumatic devices, speed changers and other general purpose applications.

Conoflow GH20 Series (303 SST Internals) Pressure Reducing Regulator:

Conoflow’s Service (GH20 Series) Regulators are rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Buna “N” diaphragms are standard in the aluminum units.

Conoflow GH20 Series (316 SST Internals, Body & Bonnet) Pressure Reducing Regulator:

Conoflow’s Service (GH20 Series) Regulators are rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Buna “N” diaphragms are standard in the aluminum units.

Conoflow GH20 Series (Aluminum Bonnet) Pressure Reducing Regulator:

Conoflow’s Service (GH20 Series) Regulators are rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Buna “N” diaphragms are standard in the aluminum units.

Conoflow GH20 Series Brass Pressure Regulator:

Conoflow’s Service (GH20 Series) Regulators are rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Buna “N” diaphragms are standard in the aluminum units.

Conoflow GH20VT Series (Brass) Low Pressure Regulator:

Conoflow’s GH20VT Series (Brass) Low Pressure Regulator is designed to accurately regulate the sub-atmospheric pressure of a vessel being evacuated. These units are especially suited for laboratory work and test stands for simulation of high altitude conditions. Metal to metal seat (standard).

Conoflow GH21 & GDH21 Series Differential Regulator:

Conoflow’s Differential Pressure Regulators are used to maintain a constant pressure differential across a variable or fixed orifice, providing a constant flow rate regardless of variations in upstream or downstream pressure. Various forms of differential pressure regulators are available.

Conoflow GH22 and GH42 Series Ratio or Flow Boosting Relay:

The Conoflow GH22 & GH42 Series Flow Boosting Relay is used to boost, amplify or reduce the pneumatic signal of a controller or similar instrument in a predetermined ratio. Using an independent supply pressure for greater flow volume, the unit relays an instrument signal to a final control element such as a valve actuator.

Conoflow GH30 Series Back Pressure Relay:

The Conoflow Series GH30 Back Pressure Regulator is used to maintain a constant upstream pressure of gas, vapor or liquid. Designed for accurate regulation under low flow conditions, these units are widely used for protection of analysis instrumentation or as a relief valve in supply pressure lines to control devices.

Conoflow GH40 Series (302/303 SST Internals) Pressure Reducing Regulator:

Conoflow’s Service (GH40 Series) Regulators are for applications where positive shut-off and minimum air consumption are required. These rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Teflon Buna “N” Teflon diaphragms are standard in the Stainless Steel units.

Conoflow GH40 – 316 Stainless Steel Pressure Regulator:

Conoflow’s Service (GH40 Series) Regulators are for applications where positive shut-off and minimum air consumption are required. These rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Teflon Buna “N” Teflon diaphragms are standard in the Stainless Steel units.

Conoflow GH40 Series (Aluminum Bonnet) Pressure Reducing Regulator:

Conoflow’s Service (GH40 Series) Regulators are for applications where positive shut-off and minimum air consumption are required. These rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Buna “N” diaphragms are standard in the aluminum units.

Conoflow GH40 Series (Brass) Pressure Reducing Regulator:

Conoflow’s Service (GH40 Series) Regulators are for applications where positive shut-off and minimum air consumption are required. These rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Buna “N” diaphragms are standard in the Brass units.

GH40VT Series (316 Stainless Steel) Vacuum Service Regulator:

Conoflow’s Vacuum Regulators are designed to accurately regulate the sub-atmospheric pressure of a vessel being evacuated. These units are especially suited for laboratory work and test stands for simulation of high altitude conditions.

GH40VT Series (Brass) Vacuum Service Regulator:

Conoflow’s Vacuum Regulators are designed to accurately regulate the sub-atmospheric pressure of a vessel being evacuated. These units are especially suited for laboratory work and test stands for simulation of high altitude conditions.